Pilot Report Details

Pilot Report - UAL1726 (November 7, 2020)

Virtual United Flight UAL1726

David Freeman United States
Departure: KSFO
Arrival: KORD
Aircraft: ()
Submitted: November 7, 2020
Flight Time: 03.32
Landing Rate: -178 FPM
Fuel Used: 40,386 LBS
Distance: 1,602 NM
Status: Accepted

ACARS Flight Log

smartCARS version 2.1.34.0, 2020/11/7 UTC
[18:20:47] Preflight started, flying on VATSIM
[18:20:47] Flying QualityWings 787-8 United Airlines -SATCOM
[18:48:01] Pushing back with 52063 lb of fuel
[18:48:29] Engine 2 is on
[18:49:41] Engine 1 is on
[18:51:02] Flaps set to position 3
[18:55:14] Taxiing to runway
[19:04:40] Taking off
[19:04:58] Climbing, pitch: 6, roll: level, 157 kts
[19:04:58] Cruising at 370ft, pitch: 7, 157 kts
[19:05:06] Gear lever raised at 381 ft at 174 kts
[19:05:41] Flaps set to position 2 at 2654 ft at 182 kts
[19:05:48] Flaps set to position 1 at 2973 ft at 189 kts
[19:06:09] Flaps set to position 0 at 3651 ft at 216 kts
[22:20:29] Flaps set to position 1 at 8466 ft at 244 kts
[22:30:22] Flaps set to position 2 at 6392 ft at 227 kts
[22:30:59] Flaps set to position 3 at 5795 ft at 208 kts
[22:33:16] Gear lever lowered at 3471 ft at 160 kts
[22:33:18] Flaps set to position 4 at 3475 ft at 159 kts
[22:34:00] Flaps set to position 5 at 3280 ft at 135 kts
[22:36:43] Descending
[22:36:43] Approaching
[22:36:43] Final approach, 128 kts
[22:37:02] Touched down at -178 fpm, gear lever: down, pitch: 5, roll: level, 124 kts
[22:37:33] Landed in 3559 ft, fuel: 11775 lb, weight: 301623 lb
[22:37:33] Taxiing to gate
[22:37:43] Flaps set to position 0
[22:38:36] The flight may now be ended
[22:38:36] Arrived, flight duration: 03:32
[22:42:02] Engine 1 is off
[22:42:03] Engine 2 is off

Comments

  • David Freeman writes: “Request Award P0-P3. My real world commercial multienge instrument rating was converted via VATSIM's real world liscense conversion program. https://stats.vatsim.net/search_id.php?id=1003249”
  • Virtual United Airlines writes: “Submitted for closer review. Reason: 'Award' found in comment field”