Pilot Report Details

Pilot Report - 816 (June 28, 2018)

Virtual United Flight 816

Mark Barnette United States
Departure: AYPY
Arrival: YMRB
Aircraft: 767-3CB(ER) (B763)
Submitted: June 28, 2018
Flight Time: 03.25.22
Landing Rate: -198 FPM
Fuel Used: 288 LBS
Distance: 8,778 NM
Status: Accepted

ACARS Flight Log

[14:51] - MJC8Q400_CJC
[14:51] - Flight 816 is ready to depart AYPY with a final destination of YMRB.
[14:51] - Parking Brake Applied
[14:51] - Boarding
[14:52] - Navigation Lights ON 6AGL
[14:52] - Navigation Lights OFF 6AGL
[14:52] - Navigation Lights ON 6AGL
[15:25] - Flaps to position 1
[15:27] - Parking Brake Released
[15:27] - Taxiing to Runway
[15:30] - Landing Lights ON 6AGL
[15:31] - Taking Off with 68 passengers on board
[15:31] - Take off at 148kts, with a pitch of 10deg and 8108lbs of fuel on board
[15:31] - Wind Heading 7 | Wind Speed 1kts | Temperature 22 deg C
[15:31] - Climbing to TOC
[15:32] - AutoPilot Engaged at 1473AGL
[15:32] - Flaps to position 0 at 1634ft and 173kts
[15:35] - Landing Lights OFF 10778AGL
[15:50] - TOC reached
[15:50] - Cruise started
[17:53] - TOD reached
[17:53] - Descending to destination
[18:00] - Landing Lights ON 8215AGL
[18:01] - Landing Shortly
[18:02] - Flaps to position 1 at 3839ft and 206kts
[18:07] - Flaps to position 2 at 3563ft and 178kts
[18:08] - Flaps to position 3 at 2713ft and 166kts
[18:10] - AutoPilot Disengaged at 1067AGL
[18:12] - Landed at -198fpm. With 3100lbs of fuel onboard and a pitch angle of 4deg.
[18:12] - Wind Heading 185 | Wind Speed 6kts | Temperature 18 deg C
[18:12] - Taxiing to Gate
[18:12] - Landing Lights OFF 10AGL
[18:12] - Flaps to position 0
[18:14] - Parking Brake Applied
[18:14] - Arrived safely at YMRB. We hope you enjoyed your flight!
[18:16] - Navigation Lights OFF 10AGL
[18:16] - Navigation Lights ON 10AGL
[18:16] - MJC8Q400_CJC
[18:16] - MaxSim Rate: 1x
[18:16] - ver 1.0.1.2

Comments

  • Mark Barnette writes: “Turboprop Award”
  • Virtual United Airlines writes: “Submitted for closer review. Reason: 'Award' found in comment field”